The Aurora 315W CMH All-In-One Set from Lumatek includes a state-of-the-art 315W ceramic metal halogen lamp (CMH / CDM / LEC), a dimmable electronic ballast for CMH lamps, 1 pair of rope ratchet hangers with a maximum load of 68kg and a compact hammer-blow reflector with matching PGZX18 lamp socket. The set also contains a 5 meter long jack cable, intended for the connection between your ballast and the digital control panel light control.
The reliable electronic ballast 315W CMH dimmable from Lumatek uses square wave technology to operate and control a 315W ceramic metal-halogen CMH lamp. The ballast can be switched from 50% to 100%, consisting of 6 switching levels (50, 60, 70, 80, 90, 100%)
The Lumatek CMH lamp 315W 240V is a pulse start lamp which was developed for use with electronic ballasts 315W CMH. The high-quality ceramic burner technology is made with a special gas mixture for horticulture, which generates an optimal light output for healthy plant growth.
The CMH technology generates high-energy PAR / PPF values with low heat generation at full power. The color spectrum of the CMH lamp or also known as CDM / LEC is very close to sunlight, which enables healthier plant growth and higher yields. With a color rendering index (CRI = Color Rendering Index) of> 90%, the Lumatek CMH lamp is perfectly suited for plant cultivation of high-quality products and the extraction of essential oils.
The ceramic burner enables the lamp to operate at higher internal temperatures, which increases color rendering, performance and efficiency. The ceramic burner resists interaction with the chemicals inside the tube, which stabilizes the chemical mixture over the life of the lamp, thereby improving color consistency and maintaining the PAR / PPF level. Pulse start technology enables faster start and reignition times, longer lamp life and better lumen maintenance.Technical data ballast 315W CMH:
Electronic ballast for 315W lamps CMH
Dimmable: yes
Switching levels: 50%, 60%, 70%, 80%, 90%, 100%
Voltage: 240V 50 / 60Hz
Current consumption: 1.5 A.
Input power: 334W
Output power: 315W
Power factor:> 0.97
Voltage range: 185 to 275V
Operating frequency: low frequency
No audible sound, no flicker
Ambient temperature for full load operation: 40 ° C
Case temperature rise (At): 30 ° C
Protection class: IP20
Humidity: 90%
Dimensions (LxWxH): 245x114x81 mm
Weight: 2.5 kg
Plug cable approx. 2 meters long (included in delivery)
IEC connector for reflector cable available
Technical data 3100K lamps:
Lamp power: 315W
Color temperature: 3100K
Lamp voltage: 100V
Lamp current: 3.15A
Luminous flux (lm): 37,000 Lm
Luminous efficacy (lm / W): 118
Average service life: 14,000 hours
Max. Warm-up phase: 3 min
Max. Re-ignition time: 10 min
Color rendering index: 90+
PAR value: 650 µmol / s
Max. Total length: 193 mm
Center length: 88 mm
Diameter lamp: 39 mm
Max. Temperature of the base: 250 ° C
Max. Temperature of the flask: 350 ° C
Material of the lamp: UV block quartz
Socket: PGZX18
Technical data reflector:
Dimensions: L 27 x W 24 x H 13 cm
Version: PGZX18
Scope of delivery:
Lumatek electronic ballast 315W CMH dimmable
Lumatek CMH lamp 315W 3100K
Compact hammer blow reflector with PGZX18 socket
1 pair of rope ratchet hangers with a maximum load of 68kg
LUMATEK Control Link jack cable